Catalog pricing shown. Please Sign In to see your pricing.

Arcoaire AC Single Phase Split System Deluxe Single Stg 5 Ton 61k BTU Coil 96Pct Gas Furnace 100 MBH 14 SEER2 V1

Arcoaire AC Single Phase Split System Deluxe Single Stg 5 Ton 61k BTU Coil 96Pct Gas Furnace 100 MBH 14 SEER2 V1
Kit Includes BIP Gas Cock, PVC Ptrap Kit, Electrical Box, Switch, Receptical & Duplex Cover, whip 6' 3/4" 8GA, Disconnect, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, No Vent Caps, 2" Plastic Pad, Furnace Leveler, 2H/2C Thermostat

This retail set contains

Vendor Name:
Arcoaire
URI Part Number:
Arcoaire AC Single Phase Split System Deluxe Single Stg 5 Ton 61k BTU Coil 96Pct Gas Furnace 100 MBH 14 SEER2 V1
Shipping Weight (Lbs.):
200
Energy Star:
Not Energy Star Compliant
Heating Input (BTUH):
100 MBH Heat
Includes:
H4A6S60AKAWA, N96MSN1002120A, EVD4X61M24A, ACGKIT9
Nominal Capacity (BTUH):
60000
Cooling Efficiency (EER2):
12
Cooling Efficiency (SEER2):
14
System Indoor Type:
Gas Furnace
System Outdoor Type:
Single Stage
System Coil Configuration:
Vertical Power "V"
Furnace Efficiency:
96
System Nominal Tons:
5.0 Ton
AHRI System Number:
212027932
A/C, Single Phase, Split Gas Furnace Single Stage, Vertical Power "V" H4A6S/N96MSN/EVD4X

Air Conditioner Condenser
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80ESL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride igniter
  • One piece prepainted steel cabinet
  • In-shot burners
  • 33 1/3” (847mm) high, for ease of installation
  • Quarter turn knobs for easy door removal and secure attachment
  • Factory shipped for natural gas, convertible to propane with accessory kit
  • Four position - upflow/downflow/horizontal (left/right) installation
  • Three position inducer elbow capability
  • Through the casing flue pipe for counterflow applications
  • Common venting with other Category I appliances
  • Masonry chimney adapter available
  • Self diagnostics
  • Slide out blower assembly

Gas Furnace

  • Certified to leak 2% or less of nominal air conditioning CFM delivered when pressurized to 1 inch water column with all present air inlets, air outlets, and condensate drain port(s) sealed
  • Approved for Manufacture Housing/Mobile Home with kit
  • 18 Speed EC Constant Torque Motor (set up w/ app)
  • RPJ aluminized steel primary heat exchanger
  • Stainless Steel Secondary Heat Exchanger
  • Direct ignition with Silicon Nitride ignitor
  • Direct vent (2-pipe), single-pipe venting, or ventilated combustion air
  • 35” (889mm) high, for ease of installation
  • Simplified factory installed internal condensate drain system
  • Four position - upflow/downflow/horizontal (left/right) installation
  • At least twelve different venting configurations
  • Through the casing flue pipe for counterflow or horizontal applications with accessory (order separately)
  • Self diagnostics with 3 digit code
  • Twinning capable (select sizes) w/ kit
Evaporator Coil
  • Corrosion Resistant Aluminum
  • Low Pressure Drop
  • TXV metering device factory installed
  • Compact design, shorter than A-coils
  • Hemmed flanges for safer handling
  • Cabinets meet or exceed 2% air leakage codes
  • UV knockout
  • No delta plate allows easy cleaning
  • 30-40% Lighter than “A” Coils
  • 80% Fewer Factory Braze Joints vs. “N” Coils
  • V Design Reduces Cabinet Sweating
  • Helium leak tested @ the factory